Heating Principle
The natural gas or LPG is passed through the gas fixture within the unit, mixed with combustion air, then burned separately within tube exchangers by means of the electronic firing module. The burned hot gasses are circulated within the exchangers with the help of a fan, and once they have cooled down, are exhausted to the outside. When tube exchangers heat up, the fan at the back of the unit starts working, takes in cool air from the environment, passes it through the exchangers and discharges the heated air back to the room. Since the room begins to heat up, the cycle continues with an ever increasing performance. When the room reaches the desired temperature, the control panel or thermostat control causes the system to stop, and to start back up when the room drops below the set temperature.
Advantages
Silversun Hot Air SR series condensing hot air generators are the most efficient hot air generators with up to 108% efficiency figures, thanks to their high efficiency boiler, modulated premix burner, and water exchangers.
• Premix burner, low N0X values (less than 20mg / kWh)
• High thermal efficiency (up to 108%)
• Can be modulated between 30% and 100%.
• The capability to set air flow rate between 20% and 100% as an optional feature.
• Modbus connectivity option
• Independent combustion and heating circuit
• Water temperature which does not exceed 95°C
• Can be connected to duct via radial fan (the SRC series)
• Has automatically fired burners.
Areas of Use
• Factories
• Workshops
• Warehouses
• Hangars
• Service Stations
• Sports Halls
• Greenhouses
• Farms
• Cafés and Restaurants
• And Similar Facilities
